• Install Usb Driver
• Find My Usb Device
• Etc Usb Devices Driver Updater

Most current ETC devices that do not have a network port can be updated via the UpdaterAtor Software and either a Gadget I, Gadget II, or an ETC USB-RS485 Converter (commonly called 'the Whip' or 'the USB Whip'). This is a purpose-built tool that allows you to perform updates via the USB connection on your PC into the 5-Pin DMX-In port on your ETC Device using a proprietary protocol. Since this converter is powered via USB, it may be necessary for your computer to be plugged into an outlet, if it is a laptop computer. UpdaterAtor will not update devices through non-ETC USB-to-DMX converters. The remainder of this post will use the term 'update device' in place of one of the three options above.

Uninstall USB device driver to make USB recognized. Being different from the options of updating or degrading the driver version, uninstalling the driver could result in a total disability of all the USB ports. So take care of this last-try method. Open Device Manager (Right Click on Windows Logo and Click Device Manager). Find Out Plugged USB Device Name Using df Command. To view each device attached to your.

UpdaterAtor Software is available for download for free from ETC's website. Currently the software is only available for Windows OS.

As mentioned above, the USB hub incompatibility is the major factor that leads to the USB composite device driver error. If all the above methods fail to fix the error, you may need to consider using a USB 2.0 hub or expansion card. Compared with USB 3.0, USB 2.0 has better compatibility with some old devices. MTP or (Media Transfer Protocol) is a set of custom extensions to the Picture Transfer Protocol (PTP) devised by Microsoft, to allow the protocol to be used for devices other than digital cameras, for example digital audio players such as MP3 players, and other portable media devices, for example portable video players. Android USB drivers are a necessary tool in your PC and Mac. They act as a bridge between your mobile device and your PC helping them to interact and communicate. The USB drivers help in connecting our phones to your computer and performing tasks like transferring photos and other data.

The USB-RS485 Converter Assembly is a 6 foot USB to 5-Pin XLR adaptor available for purchase from an ETC dealer as ETC part number 5000A1039. If you need help finding an ETC dealer in your area, please use the Find A Dealer tool at the top of each webpage.

Step 1) Launch UpdaterAtor on your computer. When the dongle is connected to your computer via USB, an additional button, {USB/DMX Devices} will be available in the main window display:

Step 2) Click {USB/DMX Devices} to update. The USB Update wizard will open. The wizard will guide you through the steps for updating.

Step 3) Make sure the 5 pin XLR connector on the update device is connected to the device you wish to update, and that the device is powered on. Some products can be updated with more than one device on the DMX line - in that scenario, updates are handled one at a time, but do not require each device to be individually plugged in. Once the cable is connected and the device is on, click {Next}.

Step 4) A display will open with all of the devices that can be updated via the update device. Click the type of device you are trying to upgrade and click {Next}.

Please Note, If the software for the device is not found on your computer, this warning will be displayed:

The software for the devices can be downloaded from the Setup Versions display, which is available if you close the wizard.

Step 5) A device upgrade screen will open with the option to update one or multiple devices. Then click the {Finish} button. The following screens will vary depending on product; the following example is for the Source 4 LED and Desire Product lines.

Multiple devices can be updated if they are connected to each other via their DMX Thru to DMX In ports. If you elect to upgrade multiple devices at the same time, be aware that the updates will not happen concurrently: one fixture will be updated, then the next, and so on.

Once the software update begins, you will see a progress bar at the bottom of this screen. Please do not unplug Power or the update device until the software update is complete. Doing otherwise may corrupt the firmware in your fixture.

VIDEO WALKTHROUGH

Summary :

USB mass storage device driver issues has many situations. Perhaps you are bothered by one of them. If so, so you know how to fix the problem. In this post, MiniTool Software will show you some useful methods. We hope these solutions can solve your issue.

If your USB mass storage device has a driver problem, you can go to the Device Manager to check whether there is an error hint. Perhaps, you may find an error message like Unknown USB Device (Device Descriptor Request Failed), Unknown USB Device (Port Reset Failed), Unknown USB Device (Set Address Failed), etc. At times, you may see that there is a yellow mark next to the USB mass storage device.

Obviously, you encounter the USB mass storage device failed issue. Unless you fix it, you will be unable to use the connected USB device as normal.

How to fix USB mass storage device driver issue? We collect some useful methods and show them in this post.

Install Usb Driver

How to Fix USB Mass Storage Device Driver Issue?

1. Update/Reinstall the USB Mass Storage Device Driver
2. Check the Registry
3. Modify the Power Settings

Method 1: Update/Reinstall the USB Mass Storage Device Driver

When your USB mass storage device not working and you are sure that your USB mass storage device has a driver problem, you should first go to Device Manager to update or reinstall the USB mass storage device driver. This is because the USB mass storage device driver may be outdate, missing, or damaged.

How to Update the USB Mass Storage Device Driver?

1. Use Windows Search to search for device manager and click the first result to open it.
2. Find the device driver you want to update and right-click it. Then, select Update driver.
3. Follow the on-screen introduction to update the device driver.
4. Reboot your computer.

How to Reinstall the USB Mass Storage Device Driver?

1. Use Windows Search to search for device manager and click the first result to open it.
2. Find the device driver you want to update and right-click it. Then, select Uninstall device.
3. Click Uninstall on the pop-up interface to uninstall it.
4. Restart your computer and Windows can automatically install the driver to your computer.

Method 2: Check the Registry

If the registry value is set wrong by mistake, you can also encounter the issue of USB mass storage device failed. You can check the Registry to have a try. However, to keep your Registry keys safe, you’d better back them up before modifying.

Find My Usb Device

1. Press Win+R to open Run.
2. Type regedit and press OK to open Registry Editor.
3. Go to this path: HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesUsbStor.
4. Make sure the value of Start is 3. If not, you can right-click Start and select Modify to change the value to 3.

Method 3: Modify the Power Settings

The power settings of the USB device can also influence the situation of the USB device. You can go to Device Manager to check whether the power settings are suitable.

1. Open Device Manager.
2. Go to find the USB mass storage device you want to fix and double-click it.
3. Go to the Power Management section and make sure Allow the computer to turn off this device to save power is unchecked.

Bottom Line

These solutions should solve the USB mass storage device driver issue you are facing. However, if the device is damaged and there are some important files in it, you can use MiniTool Power Data Recovery, a professional data recovery software, to rescue them.

You can press the following button to get the trial edition and then use it to scan the drive you want to recover data from.

If this software can find your needed files, you can upgrade it to a full edition and then recover all your files without limits.

Etc Usb Devices Driver Updater

Should you have any related issues, you can let us know in the comment.